Model 904 Macro Slant Table Easiest operation in the business, just clamp hem into auto air clamp bar - NOTE: Ergonomical correct position for loading, program desired finished length into counter and press "start". The machine automatically goes to preset length then trim and attach PRESSURE SENSITIVE BUCKRAM , fold in heading; flip quick release valve to release drapery; press "auto down" and the clamp bar returns to loading position. For COMMERCIAL users; clamp 3 layers into clamp bar, follow above sequence and triple your production. You say you do HEADING FIRST ??? Just clamp heading into clamp bar, program the counter to finished length, trim the excess and either mark or fold in bottom hem. This table can be installed against wall, free standing, or hung from a bar joist. Built in 16, 24 & 32 foot widths. Ask about special order for stage draperies The hardware includes: Tracks made from Unistrut 5000 series w /4 # 35 chains that pull the clamp bar 24 pneumatic clamps w/ adjustable bars to hold both lining and drapery HP motor w/ 300% oversized operating relays for years of operations Dual shaft gear head (two chains- a safety factor) Red Lion Electronics (total system) plus manual control and sensitive "Jog Button" Designed to compensate for un-even floors or walls , or both Z bar aluminum clamping bar (assure evenness) Bar with clamps weigh 135 lbs. 5/8 thick plasticoated -weighs 85 pounds each. Has been tested in the field for over 18 years. Total weight of hardware over weight of machine is over 1200 # (definitely not a micro) This workhorse has an undisputable reputation for simplicity and reliability. 1611 Fabricon Blvd Jeffersonville, IN 47130 Phone: 1-800-372-7379, 1-812-288-4455 Fax: 1-812-284-1518 drapery@iglou.com © 1997-2001 Morgan Manufacturing and Engineering Company, Inc