Measurecraft 200 The Measurecraft 200 is a heavy duty surface wind machine. It has two drives that work as a unit due to the electronics; however, both drives are reversible. The rear or "feed drive" is a slave drive to the front or "take-up" drive. Speed of the rear drive can be set to feed the material a little faster if you want to roll or measure tensionless. This works well if you have a material like a "T shirt" tubular material, and you do not want to stretch the material. If you have a stable material, and you want a good tightly rolled bolt of material, then the rear drive is set to feed a little slower. Three sizes of inserts come with the machine for different bolt sizes. For bolts that are not round, a bar is inserted through the bolt and into the guides to stabilize the roll while feeding it off. All of our machines have industrial grade electronics, and they can be set to any measure increment you need. 1611 Fabricon Blvd Jeffersonville, IN 47130 Phone: 1-800-372-7379, 1-812-288-4455 Fax: 1-812-284-1518 drapery@iglou.com © 1997-2001 Morgan Manufacturing and Engineering Company, Inc